If your home has hard water, it’s not surprising that your family decides to install a whole-house water softener. To help you find a suitable water softener system for your home, you can visit UnHappyHipsters.com. After purchasing, the next process, which this post is all about, is planning the installation. Most homeowners who can’t wait to start the installation wonder how to prepare the home for it.
Although technicians can take care of the entire installation, you don’t have to do anything extra. However, there are some tasks you can do to make the process more efficient if you feel like it. This gives homeowners more energy to prepare their home, plan the installation, and do other things to ensure the first few gallons are a success. Here are the things you can do.
Get Consultation to Choose Location
If you haven’t, invite a water softener team to your home to inspect it and determine the best location to install your water softener. Depending on your plan, this will be right next to or very close to the water supply. A consultation will help you choose the best location to get the most benefit for your home.
You and your consultant can find an alternative location for your water softener if it is not apparent. Alternative areas for water softeners include the basement, garage, and laundry room. There are three things to consider when looking for the best location for your water softener. You will need a water pipe, an electrical outlet, and a drain. A floor drain is best, but any other drain with pipes will also work. The ideal location for your water softener is near the main water pipe. This way, you can soften all of your water as soon as it enters your home.
Determine the Main Water Shut-Off
Next, make sure you know exactly where the main water stop is located, whether it is indoor or outdoor. It is easier if you have already chosen a location near the main water line before starting the installment. The installation is done after the water supply to the house has been completely shut off for a few hours.
The reason for this is that all the water in your home will now pass through the water softener before reaching other pipes. This is not only better for you but also the health of your softener. It’s also good for the longevity of your home and appliances. Limescale deposits keep your pipes from clogging and extend the life of your devices.
Clean the Space Reserved for Water Softener
If you have the energy, it’s a good idea to sweep the area where the water softener will be installed with a broom. This is the best way to ensure your new equipment is installed on a smooth, clean floor. Use your energy to move stored items around. Then sweep the corners to remove dust grains and dry leaves. Even if the floor is not completely dry, you can mop it until the equipment is ready to begin the installation.
Make Sure to Be Available During Installation
Also, make sure you’re in the house when the installation crew arrives. That way, you’ll be able to oversee the installation of your freshwater system. Many technicians will be happy to show you how the unit works or answer your questions as they work. The other option is to make sure everything is in order.
You can then tie vinegar bags around the showerheads so that the first few gallons flow through clean faucets into freshly cleaned sinks.
